Keepin' it fresh

Cleaning your Stove top the Natural way

How often do you clean your stovetop? Do you wipe up spills and splatters right away? Or do you, ahem, let it build up? And after you've got a crust of burnt gunk, how do you clean it up? Here's a tip for those of us who, again, ahem, procrastinate on cleaning the stove. There's a secret weapon we've found for getting it clean with no harsh chemicals and with a minimum of elbow grease.

The secret weapon is simple: Your hot water kettle!

This is what I do when my stove gets a little crusty and thick with burnt-on stuff. I boil water in the kettle, then dribble just a little water over the entire stovetop. I let it sit for about five minutes to do its work and to cool off a bit. Then I go at the stove with a soft scrub pad or steel wool if necessary. The crusty stuff comes right off, and I finish up with just a bit of soap and a final rinse. Result: Sparkling clean stovetop!

Now, this method may not work for all stoves; if you have a ceramic or induction cooktop, check your instructions and documentation. But overall, what's simpler and more kitchen-friendly than hot water? It soaks stuff right off, and is completely natural and chemical-free. The power of boiling water — never underestimate it!

Air Conditioner

Its been a hot year, and air conditioners have been working hard! Here are a couple of tips to make sure it keeps running smoothly!

1. Change the filter.

Central air systems should have their filters changed at least every few months. But if you've let the chore slide to the back of your mind, now's as good a time as any to replace the filter.

2. Clean the vents.

Again, a regular dusting several times a year is a must. But if you've been slacking, do it now. You could also consider having a professional give your air ducts and vents a thorough cleaning.

3. Check to see if you're blocking the condensing unit.

The part of your air conditioner that draws air into the system obviously needs to be uncovered. That means any fold-able patio chairs you've conveniently stored in your A/C closet for the winter need to come out. Also take the time to clean obvious obstructions like leaves from around the unit.

4. Check your freon levels.

Your air conditioner isn't consuming freon coolant, so under ideal conditions, the freon would never need to be filled or changed. But you could have an HVAC tech check for a leak (especially with older models) or another irregularity as part of your annual A/C maintenance plan.

5. Check everything else.

If you're going to have a pro come in to check the freon, also have them check that the electrical controls and coils are in top shape. A professional HVAC tech can also calibrate your thermostat.

Fix it or Replace it?

This is a good video that goes over some of the main points to consider when dealing with an appliance issue.

When to repair or replace appliances - click here

You can also come into Express Appliance and we can help answer your questions, repairs on your current appliance, or show you options for a new appliance for your home. 

Laundry Mistakes to Avoid

Nobody wants to do a chore twice. Here are twelve common laundry mistakes to avoid to help your laundry day go more smoothly.

Mistake 1: Rubbing Stains Furiously

This can make the stain worse and possibly wear away the fabric. Instead, be gentle and methodical. Treat the stain as soon as you can; the less time that elapses, the more success you’ll have. And always use a white cloth so that colors can’t transfer. Dab, rather than rub, working from the outside in to keep the stain contained.

Mistake 2: Using Too Much Detergent

Excess suds can hold dirt pulled from clothes and get caught in areas that won’t always rinse clean, like under a collar, leading to bacteria buildup. The remedy: Use only half the amount of detergent that you normally do, then gradually increase that amount if your clothes are not coming out as clean as you would like. An exception: If you have hard water, you may actually need more soap than you are using. Check the recommendation for hard water on your detergent bottle.

Mistake 3: Filling the Washing Machine Incorrectly

When washing in a top-loader with liquid detergent, you should first fill with water, then add soap, then add clothes, right? Well, no. This protocol from the past was meant to prevent residue on the fabric and the machine. But modern detergents are phosphate-free and not harmful to clothes the way old formulas were. As long as you’re not using bleach, don’t add clothing after the water (a pain, because clothes can float). Instead, use this order to distribute detergent best: clothes, then water, then soap.

Mistake 4: Washing an Item That Has a “Dry-Clean” Label

This isn’t necessarily a blunder. Most items that say “dry-clean” can be hand washed and air-dried. This includes natural fibers, such as linen and most silks. First check for colorfastness; moisten a cotton swab with mild detergent and dab it on a hidden seam to see if any dye comes off. If not, go ahead and dunk the garment in soapy water just once or twice, then rinse and immediately roll it in a towel to extract moisture. However, you should stick with dry-cleaning for certain categories: leather, suede, silk dupioni, anything with embellishments, and structured pieces (like blazers).

Mistake 5: Not Zipping Zippers All the Way to the Top

Metal teeth can snag delicate and woven clothing that’s being washed in the same load.

Mistake 6: Washing Shirts All Buttoned Up

This seems like a good idea, but it can stress buttons and buttonholes and lead to premature poppage. Take the time to unbutton before tossing clothes in the washer (or the hamper).

Mistake 7: Overusing Bleach

Think twice before you reach for the bleach: You actually don’t need it to get rid of protein stains, like blood, sweat, and tears. (Okay, maybe tears are not a big laundry issue.) One natural option: Toss stained socks, tees, and undies into a big pot of water with a few lemon slices and bring to a boil for a few minutes.

Mistake 8: Not Leveling Your Washing Machine

If your washer is not level, vibrations can damage your floor and prematurely wear out key components, like the shock absorbers and the tub bearings. (Plus, there’s that terrible noise.) Place a level on top of the machine and adjust the feet, which typically screw up and down, accordingly. If this doesn’t help, beef up the floor with a ¾-inch-thick piece of plywood that’s a little larger than the machine’s base. It will help absorb vibrations.

Mistake 9: Letting the Dryer “Rest” Between Loads

Some folks like to wait an hour after one cycle concludes before putting in a new load. But in fact, running back-to-back dryer loads is smart and efficient. It lets you take advantage of retained heat from the previous cycle, cutting down on energy usage.

Mistake 10: Ignoring the Permanent Press Setting on Your Dryer

This medium-heat cycle with a cool-down period at the end is a proven crease curber. More tips: Don’t pack clothes in; they need to float freely or they’ll wrinkle. (Note: Ditto for the washer. Stuffing it can create wrinkles and prevent your clothes from getting clean. On top of that, it can put pressure on the machine’s bearings and shock absorbers, causing them to wear down prematurely.) And procrastinators, take note: It really does eliminate creases if you fold clothes when they’re still hot, right out of the dryer (or, if you prefer, right out of the pile that you dumped onto your bed). Give each item a quick shake so wrinkles don’t set in. If you don’t have time to fold a load immediately, shake out the pieces and lay them flat in the laundry basket, one on top of another, while they await further attention.

Mistake 11: Tossing Socks in Willy-Nilly

Here’s a sock-saving tip: Place socks in the washer tub first, so they’re less likely to attach themselves to other garments and then go missing.

Mistake 12: Not Cleaning Your Dryer

Even though you empty the lint filter after each use (right?), lint buildup can clog the duct over time and become a fire hazard. A sure sign that your dryer is clogged? It takes more than an hour to dry a load. Once a year, detach the hose from the back of the dryer and snake a long brush through to push out lint (20-foot dryer vent brush, $35, gbindustrialdirect.com). Also scrub the lint filter once a year with a small toothbrush and a bit of detergent. Rinse, then air-dry completely.